Pelt Handling Equipment
Pro Pins
Pro Pins are a 5/8 inch aluminum head push pins with a tempered steel point. These come in a reclosable durable container. No more push pins spilling in the drawer. No hammer needed to use these. Come in 100 count, 250 count or 500 count.
100 count / $8.50
250 count / $20.75
500 count / $39.75
Wall Mount Hardwood Fleshing Beam
We also now have a wall mount hardwood fleshing beam that is 42 inches long x 7 1/2 inches wide. This is the same style and great quality, just made to mount to the wall.
Each / $40.00
Wall Mount Beam Support
Support for your wall mount fleshing beam. The support leg can be adjusted to your desired height for your comfort. It has a bottom piece for more stability. Heavy duty hinges with no slop. The support is made of PVC for easy clean up. It comes complete with all the hardware and mounting screws. Easy to follow instructions on mounting enclosed.
Each / $21.95
Fleshing Beam - Wall Mount - Narrow
Our hardwood fleshing beams are 57 inches long x 5 3/4 inches wide. The head of the beam has a small flat area instead of a point like other fleshing beams. This allows you more comfort for all the hours spent working on the beam.
e / $40.00
Fleshing Beams - Long
Our hardwood fleshing beams are 57 inches long x 7 1/2 inches wide. This is the same type of fleshing beam that Leon used in Top Lot Coon Handling DVD. The head of the beam has a small flat area instead of a point like other fleshing beams. This allows you more comfort for all the hours spent working on the beam.
Each / $47.00
Fleshing Beam - Long Narrow
Our hardwood fleshing beams are 57 inches long x 5 3/4 inches wide. The head of the beam has a small flat area instead of a point like other fleshing beams. This allows you more comfort for all the hours spent working on the beam.
each / $47.00
Mink/Muskrat Fleshing Beams with Support
Mink and/or Muskrat Fleshing Beams are made of hardwood. The combo comes with both beams and the interchangeable steel bracket to mount to your bench. When switching from one beam to the other simply slide the beam off and replace with the other beam. You can buy the combo set or buy them individually with the steel base.
Mink Fleshing Beam with Support / $19.50
Muskrat Fleshing Beam with Suppo / $19.75
Mink & Muskrat Fleshing Beams wi / $32.50
Caribou Fleshing Knife
This is a long, curved double-edged fleshing knife with unbreakable rubber handles. This blade is 10 ½ inches long x 1 1/8 inches wide. The knife weighs less than1 pound and is of a high quality. It is easy to keep sharp. (This is the knife that Leon uses.) Made in Canada
Each / $84.00
Necker 600 Fleshing Knife
This is a double-edged stainless steel blade. The blade is 14x1x1/2 inches. The total knife is 23 1/2 inches long. The handles are round. The convex side of the blade is sharp and the concave side is dull.
each / $68.95
Wiebe Elite Double Edged Fleshing Knife
Double-edged stainless steel blade is 10 1/2 x 1 1/8 inches. The concave side is ultra sharp for slicing and the convex side is moderately sharp for pushing.
each / $59.95
Dexter 3 3/4 inch Skinning Knife
3 3/4 inch Dexter steel skinning knife. Comfort grip with a blaze orange handle with non-slip grip. Dexter knives are known for a high standard steel.
each / $15.99
Soft Grip Orange Skinning Knife
This is the best priced knife on the market. Comfort grip handle. Features 440 4" steel blade with 3 holding points to keep blade secure in hand. No other skinning knife matches the quality and design at this price.
each / $8.00
Serrated Knife
A 3 1/4 inch blade with a sure-grip polyurethane handle. The wavy edge does not dull like a straight edge does.
each / $6.50
4” black handle Knife
Excellent for skinning muskrat to coyote. Its 4 inch blade is razor sharp to get the job done.
Each / $9.95
Fleshing Tool
Constructed with two cutting edges. It will pay for itself quickly as it does a great job fleshing a variety of skins. It works real well on mink and muskrat. The size of blade is 2x3 inches.
Each / $6.95
Ultimate Cross Comfort Skinning Apron
This skinning apron is a heavy duty apron. It has criss-cross straps to hold it in place verses tying around the neck. This also adds comfort and freedom while working. Made to last.
each / $35.00
Extreme Skinning Apron
Perfect for the professional fur handler. It is a thick black rubber that will take all the abuse you can give to it. There is nothing better.
Each / $21.95
Standard Skinning Apron
Ideal for skinning and fleshing furs. It is resistant to acid and animal fat.
Each / $9.95
Fur Comb
This fur comb has a wooden handle, is heavy duty, and all steel construction. It won’t come apart after years of use due to the one piece design of the combs teeth.
Each / $11.00
Fur Brush
This brush has just the right bend to penetrate the fur, making it clean, even and glossy. It is perfect for all your finish brushing needs.
Each / $5.95
Fur Hangers
Fur Hanger to hold your put up furs until time to send to the auction.
each / $3.50
6 pack / $19.00
dozen / $35.00
Tail Strippers
Plastic Tail Stripper – Strong, lightweight tail stripper. It has two different sized holes to handle mink to coyote. Aluminum Tail Stripper – The last tail stripper you will ever need to buy.
Plastic / $2.95
Aluminum / $7.95
Tail Zipper
Fast and easy way to split tails. It works on all animals that needs a tail split.
Each / $3.95
Skinning Gambrel
This will hold the animal’s feet while skinning. A must for every fur shed.
Each / $3.95
Nitrile Skinning Gloves
Nitrile skinning gloves are stronger and more durable than vinyl or latex gloves. Specify Large or X-Large size. 50 pair per box
Large / $11.75
X-Large / $11.75